Chippers

Design and Construction

rongtencropout

  1. The rotor is a solid steel drum, precision machined to produce the requested chip size. The straight knives are mounted with a special wedge system that, while utilising the flywheel effect of the rotor, lock and secure the knives.
  2. The canted knife.
  3. Machined and surface hardened “pineapple style” infeed rollers stop when the rotor reaches its maximum load. As the load decreases the feed mechanism starts up again. This start/stop sequence eliminates overloading of the rotor.
  4. The rugged, heavy duty main frame and rotor along with the chrome nickel shaft and oversized roller bearings, are engineered to accomodate the heavy shock loads typical of drum chippers.

Variants

  • HT 30/25/2

    HT-CHIPPER
    HT 30/25/2

    This is the smallest chipper in the Scanhugger chipper-line. The machine is ideal for shredding off-cut waste right at the source of the waste.

    Infeed opening:     50×300 mm
    Rotor diameter:     Ø 250 mm
    Main motor:     15 – 18,5 kW
    Capacity:     300 – 600 kg/hour

    Continue reading →

  • HT 35/30/2

    ht35302-3dThe chipper is available with 2 cutting systems.
    One rotor system with a fast rotating chipping knife ideal for shredding slabs, edgings and of-cuts.
    The second rotor system is mounted with cutting crowns for processing particle board, MDF and plywood.

    Infeed opening: 80 x 330 mm
    Rotor diameter: Ø 300 mm
    Main motor: 18,5 – 30 kW
    Capacity: 400 – 1500 kg/hour

    Continue reading →

  • HT 55/30/2

    ht55302-3dThis chipper is available with 2 cutting systems.
    One rotor system with a fast rotating chipping knife ideal for shredding slabs, edgings and of-cuts.
    The second rotor system is mounted with cutting crowns for processing particle board, MDF and plywood.

    Infeed opening: 80 x 530 mm
    Rotor diameter: Ø 300 mm
    Main motor: 22 – 37 kW
    Capacity: 500 – 1800 kg/hour

    Continue reading →

  • HT 45/45/2

    ht45452-3d-02This chipper is available with 2 cutting systems.
    One rotor system with a fast rotating chipping knife ideal for shredding slabs, edgings and of-cuts.
    The second rotor system is mounted with cutting crowns for processing particle board, MDF and plywood.

    Infeed opening: 120 x 430 mm
    Rotor diameter: Ø 450 mm
    Main motor: 30 – 55 kW
    Capacity: 700 – 2500 kg/hour

    Continue reading →

  • HT 65/45/2

    ht65452-3dThis chipper is available with 2 cutting systems.
    One rotor system with a fast rotating chipping knife ideal for shredding slabs, edgings and of-cuts.
    The second rotor system is mounted with cutting crowns for processing particle board, MDF and plywood.

    Infeed opening: 120 x 630 mm
    Rotor diameter: Ø 450 mm
    Main motor: 45 – 75 kW
    Capacity: 800 – 3000 kg/hour

    Continue reading →

  • HT 55/60/4

    The chipper with a fast rotating chipping knife for shredding short or long lengths of waste wood from the timber sizing and wood processing industry in order to produce a defined homogeneous and continuous wood chip.

    Infeed opening: 180 x 530 mm
    Rotor diameter: Ø 650 mm
    Main motor: 55 – 110 kW
    Capacity: 1200 – 4000 kg/hour

    Continue reading →

  • HT 75/60/4

    ht75604-3dThe chipper with a fast rotating chipping knife for shredding short or long lengths of waste wood, free from tramp material, from the timber sizing and wood processing industry in order to produce a defined homogeneous and continuous wood chip.

    Infeed opening: 180 x 730 mm
    Rotor diameter: Ø 650 mm
    Main motor: 55 – 110 kW
    Capacity: 1500 – 6000 kg/hour

    Continue reading →